Description
Super Nintendo SuperCIC multi-region mod kit designed by Borti4938. This is a high quality mod kit uses Panasonic resistors, AVX capacitors and Nexperia and Microchip integrated circuits. All hand soldered by me. I also select the LED resistor values to match the LED and ensure three distinct colours when changing the mode. The quick solder board (QSB) solders directly to the underside of the cartridge port to make install a breeze. The board contains the following three mods.
Multi-Region SuperCIC
The Super Nintendo SuperCIC Switchless Region Mod is a multi-region replacement for the CIC Lockout chip found inside the Super Nintendo console. It lets you run games in their correct 50 or 60 hertz aspect ratio and speed and bypass any region protection of imported games.
The reset button is used to cycle through three settings:
- Setting 1 = 50Hz (Green LED)
- Setting 2 = 60Hz (Red LED)
- Setting 3 = Auto Mode (Yellow LED)
If you are running your PAL systems in 50Hz, you are really doing the games a great disservice. I consider these switchless mods necessary for PAL consoles.
In-Game-Reset – uIGR (v2)
The uIGR (v2) mod lets you change the SuperCIC region and reset the console using controller button combinations.
D4 Region Patch
The region patch circuit will prevent any out of region notices when trying to load out of region games. Usually the correct region on a multi-region console will need selecting beforehand.
Reviews
There are no reviews yet.